Blog

A comprehensive guide | The difference between the types of tires for your trucks and which one suits your needs

Majd Eddin Safaya

February 27, 2025

Read time

Minutes to read

One of the strangest Arabic proverbs that were popular in Arab markets in the past is the example: “All soap among Arabs is soap.” This parable was used as a smart marketing trick at the time. As soon as a customer is confused between two goods, the seller says to him, “All soap among Arabs is soap.” That is, do not be afraid of you. There is no difference between them. Just buy.

In fact, this sentence succeeded in completing the deal, to the extent that it turned into a popular example that is still spoken by some to this day. Even worse, some still use it as a culture. There is no difference between the products they offer. Here is the disaster!

In the past, the products were few and the differences between them were almost rare, so this example was popular in a pleasant way without causing any embarrassment or harm. Today, it is necessary; rather, it is necessary to research in the smallest details to determine what suits our needs.

Turning to the world of truck tires, the values that Derbek has imposed on itself have required diversity in the way truck tires are designed to suit each use. This article is a comprehensive guide in which we review the difference between the types of truck tires Your path Which one fits your needs.

The importance of choosing the right tire for trucks:

أهمية اختيار الإطار المناسب للشاحنات
The importance of choosing the right tire for trucks

Choosing the right tire for trucks is one of the crucial factors that can never be overlooked. It directly affects the performance of the vehicle and the safety of the driver and goods as well. The efficiency and safety of a truck depends largely on the quality of the tires used, whether while driving on highways or over rough terrain, so you should know the difference between tires to determine exactly what you need.

Types and classifications of trail tires:

أنواع إطارات دربك
Types of Derby Tires

Before talking about the types and classification of Darbek tires, you should know the main types of tires globally. There is a great difference between family car tires and truck tires. The differences are not limited to measurements or shape, but in manufacturing, the shape of the grooves and the method of formation. Therefore, according to use, tires are classified into the following types:

1. Highway Tires (Highway Tires):

Highway tires are mainly intended for all small means of transportation that travel on paved and healthy roads. The method of manufacturing them takes into account high efficiency on paved roads, optimal fuel consumption while providing the best possible performance.

The types of tires here vary depending on the use. Racing car tires are completely different from family cars. The size and shape of motorcycle tires are absolutely different from car tires, but the principle is the same in the manufacturing method, materials and standards used.

2. Off-Road Tires (Off-Road Tires):

Off-road tires are completely different in form and content from highway tires. The priority here is durability and endurance to difficult conditions and rough terrain, unlike its predecessor in which the focus is on speed and fuel consumption.

3. Hybrid Tires (All-Terrain Tires):

  1. Mixed tires are the most popular tires in the Saudi and Gulf markets due to the many SUVs that rely on this type of tires. They combine the advantages of highway and off-road tires at the same time. Just as Arab men love highways and paved roads, they also love land and love their trips.

4. Heavy-Duty Tires:

Heavy-duty tires are designed to withstand large weights and high pressures. Each use has a special design method. All details are important in designing this type of tire. Here is the horse link. At Darbek, all these details were studied carefully and carefully. Each type of Darbek tire was designed to fit exactly what it was designed for. We will learn about all types of these tires and differentiate between them according to a number of criteria, but before that, we should talk about the factors that determine which tires suit your vehicle?

How to choose the right tire for your vehicle:

كيفية اختيار الإطار المناسب
How to choose the right frame

Before talking about the types of Darbek tires and knowing the differences between them, it is necessary to know the factors that determine the shape and quality of heavy transport tires. When you know and analyze these points, you will be able to choose the tires that suit your vehicle perfectly. These points are:

1. The quality and size of the cargo:

When talking about truck tires and heavy transport tires, the quality and size of the load is the most important point in the selection of tires. At this point, tires for heavy trucks are different from tires for large transport buses. Therefore, the quality and size of the load is the first and most important point to determine your need, so determine the quality and size of your cargo and then move on to the second point.

2. Road conditions:

Here we are talking about a wide sea. Are the roads on which the vehicle travels paved or bumpy? Are they fast roads and therefore require fast driving, or does driving mostly on domestic roads do not require speed? Are trips far or near? Therefore, all these questions must be answered in order to move to the third point.

3. Fuel consumption:

In heavy transport, fuel consumption is not a priority in the selection of suitable tires, but it is undoubtedly an important point. For example, in long trips traveling on highways, it is possible to use fuel-saving tires. These tires are designed to reduce the impact of friction and facilitate wheel rotation, but this does not affect the transportation process and the safety of passengers and cargo. Therefore, importance is given to the first and second points at the expense of the issue of time consumption.

Derbek tire standards:

معايير إطارات دربك
Derbek tire standards

Before we learn about the types of Darbek tires and their classification, one very important point should be noted. Derbek tires are designed according to a number of international standards, so we have been able to achieve the highest degree of quality and efficiency, taking into account the need for differences between tires in terms of shape, design and use. These are:

1. Performance:

In general, highway tires are characterized by stability and comfort while driving at high speeds, while rugged tires are characterized by the ability to maneuver on unpaved roads. We have been able to provide quality models that achieve stability and comfort at speed, and help the driver maneuver on unpaved roads, to achieve the highest possible degree of efficiency in performance.

2. Endurance:

The endurance standard is one of the most difficult, sensitive and accurate manufacturing standards in the world of truck tires and heavy transport tires. We have been able to achieve these standards and introduce tires in the Saudi and Gulf markets that are characterized by their ability to withstand heavy loads and at the same time withstand high pressures in order to develop a possible life span, thus achieving the highest possible degree of durability and endurance.

3. Fuel consumption

Although fuel consumption depends mainly on the truck engine and a number of technical details, tire design also plays an important role in reducing fuel consumption. The tire grooves were built in a creative engineering method that reduces rolling resistance, thus reducing frictional resistance, giving the engine a capacity in shifts and speeds in a way that does not stress the engine and does not cause an increase in fuel consumption.

4. Cost

Here is the biggest challenge in any industry by providing a product that achieves the highest degree of quality and excellence, all at the best possible price. In Darbek, we have been able to create a unique formula that guarantees the best products at the best competitive prices.

Types and classifications of trail tires:

After learning about the types of tires and the difference between them, and after talking about the standards adopted by Darbek Tire Company, you should know the types of Darbek tires and classify them in a way that helps you choose, as you will now be able to know all types and choose the tires you need with ease.

أنواع إطارات دربك
Types of Derby Tires

1. Traffic:

These tires are suitable for all types of distances. They are suitable for walking inside cities and in long distances as well. They have been enhanced with new technologies that help to:

  • Reducing the generation of heat caused by friction with asphalt.
  • Reducing fuel consumption.
  • Withstands obstacles and strong shocks.

With these criteria, the ultimate output is smooth driving and a longer tire life. The name “Traffic Wheel” was chosen to express the smoothness of these tires and that they are the best choice for moving between and within cities.

2. The battle of the field:

These tires are also suitable for all types of distances. The Midan tires are designed to suit the Gulf roads that are characterized by high temperatures and large areas. This tire achieves:

  • Saving fuel
  • High endurance
  • Tough and durable on hot roads.
  • Very smooth driving in and out of the city
  • High quietness and shock absorption in a way that reduces noise caused by friction

With these standards, we find that Dasat Al-Midan tires are the best choice for large and medium passenger transport vehicles due to their smoothness and flexibility in driving and moving.

3. A number of lines:

Dasat lines tires are the ideal partner for drivers on commercial highways and transporting passengers for long distances. They require strength and resilience in the face of the most difficult difficulties such as increasing road temperatures. Therefore, the inner lining of the tire has been reinforced with 4 overlapping layers to provide high flexibility in withstanding shocks. It is characterized by a low level of fuel consumption. Indeed, it has been designed to suit authentic Saudi roads and capabilities.

4. Stability pad:

The most important feature of “Thabit Dash” is its name (Stability). It is intended for medium loads at different distances, as it is suitable inside and outside cities and for long distances as well. The recent driving experience through Darbek's “Stability Drive” has revealed innovative solutions to several problems that truck drivers frequently suffer from. It has a wide tread size that provides smooth driving while enhancing the geometric distribution of capillary grooves that provide a long life for the tire, so it is suitable for medium cargo trucks and provides smooth and comfortable performance, while carrying and durability.

5. Flexible mat:

The most important feature of the “flexible pedal” is its harmony with all paved and rugged roads. The ideal is the “flexible pedal” with the distinctive design of the grooves in the shape of the letter “Z” and the reinforced structure of rubber, which provides high protection for the tire with an appropriate weight distribution in order to provide balance on all types of roads. No rough or flat roads are difficult for the “flexible pedal” designed to travel between cities and different environments. Therefore, we can proudly say that “flexible pedal” makes the road flexible regardless of its shape. It is suitable for all distances and all types and sizes of transportation.

6. Dasat Masar:

“Dasat Masar” tires are the solution for all environments and roads. They are a true embodiment of future tires. They are designed with high-strength hard materials, which gave the tire protection against impacts and sharp obstacles, while reducing the heat caused by tire friction with the road. We proudly used techniques to distribute the heat formed and distribute pressure on the surface of the tread, thus ensuring excellent stability on the specific track, making “Dasat Masar” tires the general and comprehensive choice for all types of vehicles and transportation methods.

7. Dasat Jisr:

In short, “Dasat Jisr” is the difference between you and advanced levels of safety and comfort in trips between cities and smooth driving. The tire is characterized by modern technologies that provide:

  • economical fuel consumption.
  • Strong performance in wet conditions.
  • noise ratio.

Therefore, “Dasat Jusoor” tires are the best choice for those who follow this path in their commercial path.

8. Daasa Tuwaiq:

The most important feature of “Dasat Tuwaiq” is its high durability, whether you are driving on flat roads or over rough terrain. “Dasat Tuwaiq” tires provide safe, smooth and effective driving at the same time due to the effort made in producing them in accordance with the environment of Saudi Arabia and the Arab Gulf countries. They are mostly used for regional and long distances due to their durability and ability to withstand long journey conditions.

9. Dasat Samoud:

“Dasat Samoud” tires are characterized by a wide wear-resistant tread, with fine sub-grooves that give the tire a longer life and enhance extreme traction. Thanks to the four-layer belt, the tire can withstand high weights and maintain its balance on rough roads and changing environments. Therefore, it is the perfect choice for truck drivers looking for durability, safety and comfortable driving.

10. Daasa Rawasi:

“Dasat Rawasi” tires are designed specifically for truck drivers who love traveling. These tires are characterized by strong performance and a high ability to withstand difficult conditions. Derbek has been able to provide innovative design and high durability, whether you are driving on mountain or dirt roads or carrying very high weights. These tires are anchored like mountains to stabilize the truck and prevent it from skidding on the road.

Tips for maintaining tires and extending their lifespan:

These tips aim not only to maintain tires and extend their life, but also to maintain the safety of drivers and cargo by avoiding emergency and unexpected accidents, and also not affecting tire wear and weakness on the quality of the ride. Therefore, you should always consider the following points in order to maintain tires and extend their life:

نصائح للحفاظ على الإطارات
Tire maintenance tips

1. Check air pressure regularly:

It is a taboo in the world of heavy transport for a transport truck to go on a mission without checking the air pressure in the tires. The driver should check the tire air pressure regularly and almost daily. Maintaining the appropriate pressure reduces tire wear and enhances the safety of the vehicle and passengers as well.

2. Tire recycling:

Make sure... Wear is inevitable. Any tire in the world will wear out. However, the difference between the types of tires is the time and extent of the impact of this wear. In Darbek, we are well aware of the difference between a tire that wears out for months and a tire that maintains its quality for several years. However, it is preferable to change the positions of tires every time to ensure equal wear, in a way that does not affect the quality of the journey.

3. Check the condition of the tires:

We are not keeping you a secret. We were reluctant to include this advice in this list. The reason is that any truck driver in the world knows very well the need to check the condition of tires permanently and daily. This advice can only be addressed to a novice person, so do not stop at it and go to the next advice.

4. Balance and periodic control:

Heavy trucks of all kinds need periodic inspection and control due to the great pressure they are subjected to during their operation. Therefore, periodic inspection of all parts of the vehicle is a matter of course. After these four tips, we move on to the last advice you really need.

5. Own your driveway tires:

Our values and principles at Darbek Tire Company require us to distinguish and innovate. Quality and durability are the basis of our products. Understanding the nature of vehicles and society is the most important thing that distinguishes us. Therefore, when you choose Darbek tires, you save yourself a lot, quality, durability and quality in standards and standards. Most importantly, we are always with you and by your side to provide the best possible service in the after-sales phase.

Why did I train you and why should I be accurate in choosing the tires for my truck?

لماذا دربك
Why did I train you

Choosing the right tire for your truck is not just a matter of performance and fuel economy. It is an important factor in maintaining the safety of passengers, truck and cargo. By choosing the right tires, you can improve the performance of your truck, extend the life of the tires, and save costs in the long term.

As for the question: Why did I train you? Here we have to go back to the introduction we started talking about. At Darbek, we believe that every truck and every task has its own standards. We do not work according to the popular saying “all soap among Arabs”, but rather work according to accurate statistics that ensure the best and most suitable product for each customer. With this mentality and conviction, we have been able to provide happiness and comfort to a large number of customers in Saudi Arabia and the Gulf countries. Let's end our conversation with a simple question: After looking at this comprehensive guide, do you think that “all Arabs have soap”? Or are there great differences between one product and another? We will leave you the answer despite our certainty of the answer.

Other articles

Tips and solutions

التكنولوجيا الحديثة المستخدمة في مصنع دربك لصناعة الإطارات

حين تُصبح التقنية لغة الإطارات ثمة سؤال يطرحه كثير من الناس حين يسمعون باسم إطارات دربك أول مرة: ما الذي يجعل إطاراً سعودياً مختلفاً لهذه الدرجة عن إطار أوروبي أو ياباني تُصنع أمثاله منذ عقود؟ الإجابة لا تكمن في مجرد "النية الطيبة" أو الانتماء الوطني، بل في شيء أكثر صرامةً وأكثر قابليةً للقياس: إنها التكنولوجيا. الإطار في صورته النهائية التي تراها قطعة مطاطية سوداء تدور على الطريق هو في حقيقته نتاج علوم متشابكة ومعقدة: كيمياء المواد، وهندسة الهياكل، وفيزياء الحرارة، والأنظمة الرقمية للاختبار والتحقق، وحين تُقرّر دربك أن تدخل هذه المعادلة بهوية سعودية، فإنها لا تبدأ من الصفر، بل تبدأ من نقطة أهم: فهم ما تحتاجه البيئة السعودية تحديداً، ثم بناء التقنية اللازمة لإنتاج ما يُلبّي هذه الحاجة. من مرحلة اختيار المواد الأولى وتركيب المركّبات المطاطية، مروراً بتصميم الهياكل الداخلية وتقنيات الاختبار، وصولاً إلى خارطة الطريق نحو مصنع سعودي كامل بحلول عام 2030. الإطار من منظور علمي:كيف يتم صناعة إطارات الشاحنات والسيارات؟ قبل الحديث عن تقنيات دربك، لا بد من فهم ما يعنيه "صناعة الإطار" على المستوى العلمي، فالإطار ليس قطعة مطاطية بسيطة، بل هو نتاج معقد يجمع بين علوم المادة وعلوم الهندسة والفيزياء، ويعتبر خلاصة الجهد العلمي البشري، والذي يتمثل في صناعة التوافق بين المواد الطبيعية والمصنعة والفيزياء الميكانيكية، وكل هذا يتم باستخدام العلوم الهندسية التي توفر الأدوات التي يتم من خلالها تنفيذ الأفكار. خمسة عناصر رئيسية تتشابك لتُكوّن الإطار في شكله النهائي: المطاط بنوعيه الطبيعي والصناعي، والمركبات الكربونية التي تمنح المطاط متانته وصلابته، والأسلاك المعدنية التي تُشكّل العمود الفقري الداخلي، والألياف الصناعية التي تُضاف كطبقات داعمة، والمداس الذي يُحدد طريقة تفاعل الإطار مع الطريق وفهم كل عنصر من هذه العناصر هو الخطوة الأولى لفهم ما تفعله دربك في مصانعها بالضبط. المطاط — المادة الأم وعلم تطويعها المطاط الطبيعي وتحدياته في البيئة السعودية يُعدّ المطاط العنصر الأكثر حضوراً في بنية الإطار وأكثرها تأثيراً في أدائه على الطريق، يُستخرج المطاط الطبيعي من أشجار تُعرف علمياً بـ Hevea Brasiliensis، وتتميز بمرونة عالية غير متوفرة في كثير من المواد الأخرى، إذ إنها مادة قابلة للمط والتمدد من غير حدوث تشققات حتى تحت الضغط العالي، وهذا ما يجعلها المادة الجوهرية في صناعة الإطارات عالمياً. غير أن المطاط الطبيعي وحده لا يكفي في البيئة السعودية ذات الحرارة الشديدة، فالشمس التي تُحرق الأسفلت حتى يتجاوز سبعين درجة مئوية في شهور الصيف تضع المطاط أمام ضغوط حرارية هائلة تختبر حدوده الجزيئية وهنا يبرز دور التقنيات الحديثة التي اعتمدتها شركة دربك لصناعة الإطارات: تطوير مركّبات مطاطية مُحسَّنة تحتفظ بمزايا المطاط الطبيعي في المرونة والقدرة على الاستيعاب، مع إضافة عناصر تعزّز تحمّله الحراري. المطاط الصناعي: الضرورة التي أصبحت علماً نروي لك القصة التاريخية لظهور المطاط الصناعي: فقد قدّم الكيميائي الألماني فريتز هوفمان عام 1909 أول براءة اختراع للمطاط الصناعي المعروف بـ"البونا"، وهو خليط من البيوتاديين والصوديوم، ثم جاءت الحرب العالمية الثانية لتُعجّل بتطوير هذه الصناعة بشكل جذري، حين اضطرت الولايات المتحدة إلى إطلاق برنامج طارئ لتطوير المطاط الصناعي بعد انقطاع وصولها إلى مناطق المطاط الطبيعي، ومن ذلك البرنامج وُلد الستايرين-بوتادين (SBR) الذي أصبح الأساس في صناعة المطاط الصناعي حتى اليوم. اليوم ندمج بين نوعي المطاط في معادلات دقيقة تُراعي طبيعة كل منتج واستخدامه: مطاط طبيعي بمرونته العالية، ومطاط صناعي بخصائص كيميائية تُمكّن من ضبط درجة الصلابة والمقاومة الحرارية وفق متطلبات كل إطار على حدة. تقنية السيليكا والفلكنة: المحور التقني الأبرز في صناعة الإطارات الحديثة أحد أبرز التطورات التقنية التي تعتمد عليها شركة دربك في إنتاج مركّباتها المطاطية هو إدخال مادة السيليكا في الخليط المطاطي،هذه التقنية تُسهم في تحسين تماسك الإطارات على الأسطح الرطبة وتقليل مقاومة الدوران، وهما معياران بالغا الأثر على كل من السلامة واقتصاد الوقود. وإلى جانب السيليكا، تعتمد عملية صناعة الإطارات على عملية الفلكنة، وهي عملية "إضافة الكبريت إلى المطاط ومن ثم تسخينه"، مما يمنح المطاط قوة عالية ومرونة شديدة في آنٍ واحد وتُستخدم هذه العملية بشكل خاص مع مطاط البولي إيزوبرين ومطاط الستايرين-بوتادين، وهما من أكثر أنواع المطاط الصناعي كفاءةً في مقاومة الحرارة العالية. هذا التطوّر التقني في المركّبات المطاطية ليس ترفاً في الهندسة؛ إنه استجابة مباشرة لمتطلبات الطريق السعودي الذي يضع الإطار في مواجهة مباشرة مع حرارة تفوق ما صُمّمت له معظم الإطارات التقليدية. الكربون الأسود — المادة التي حوّلت الإطارات من الإطارات البيضاء إلى العصر الأسود واحدة من أكثر التفاصيل طرافةً أن الإطارات في مطلع القرن العشرين كانت بيضاء اللون! إذ لم تكن تحتوي على الكربون الأسود بعد، مما جعل هذه الإطارات تتلف بسرعة وليس لديها قدرة على تحمل الاستعمال المستمر وفي عام 1910 اكتشف العلماء أن إضافة هذه المادة إلى المطاط "يعطيه قابلية عالية على الشد والضغط مما يجعله أكثر متانة، فتحوّل اللون إلى أسود وتحوّلت الصناعة معه إلى مستوى جديد من الحداثة والمواد المساعدة لتحسين أداء الإطارات. دور الكربون الأسود في صناعة الإطارات يؤدي الكربون الأسود في إطارات دربك ثلاثة أدوار متكاملة: أولها تحسين المتانة، إذ تُضيف مركبات الكربون صلابةً إلى المطاط تُقلّل من احتمالية التمزق والتآكل، وثانيها مقاومة الصدمات، حيث يخفف الكربون الأسود من تأثر المطاط بالصدمات القوية، ولهذا يُستخدم بكثرة في إطارات الطرق الوعرة وثالثها تحسين التوصيل الحراري، إذ يعمل الكربون كمادة مبدّدة للحرارة بطبيعتها،مما يحسن من قدرة الإطار على تشتيت الحرارة الناتجة عن الاحتكاك وهو المعيار الأكثر أهمية في السياق السعودي بامتياز. الكربون المستعاد: البُعد البيئي للتقنيات الحديثة والتكنولوجيا تتابع دربك في عملها التطورات الأحدث في هذا المجال، ومن أبرزها الكربون الأسود المستعاد (rCB)، الذي يُنتج من خلال إعادة تدوير الإطارات المستعملة عبر تقنيات التحلل الحراري، وتُشير المدونة إلى أن هذا النوع "يُساهم في تقليل انبعاثات ثنائي أكسيد الكربون بنسبة تصل إلى 2% مقارنة بإنتاج الكربون الأسود التقليدي، مما يجعله خياراً أكثر توافقاً مع توجهات الاستدامة البيئية التي تلتزم بها دربك. الأسلاك المعدنية — العمود الفقري الصلب للإطارات الهيكل الذي لا يراه أحد في الإطارات إذا كان المطاط هو الجلد الخارجي للإطار، فإن الأسلاك المعدنية هي هيكله العظمي، وهذه الأسلاك تعمل على زيادة قدرة الإطارات على تحمل الضغط القادم من القاطرة أو المقطورة وحتى الشاحنة، ثم تتقاسم الدور مع المداس لتوزيع الضغط الكلي على مستوى سطح الإطار وبكلمة أخرى: الأسلاك المعدنية هي التي تمنع الإطار من الانهيار تحت وطأة الأحمال الضخمة. والأسلاك في إطارات الشاحنات الثقيلة -وهي القطاع الذي بدأت به شركة دربك بشكل أساسي- ليست مجرد أسلاك مستقيمة مُثبّتة عشوائياً، بل هي عبارة عن شبكات معقدة ومتداخلة بعضها منحازة والبعض الآخر شعاعي الاتجاه، وهذا التنوع في طريقة لفّها وتداخلها هو ما يُتيح لها تغطية التنوع الموجود في استخدامات الإطارات المختلفة. ثلاثة أنواع من الأسلاك في خدمة ثلاثة استخدامات مختلفة هناك ثلاثة أنواع من الأسلاك الصلبة في هيكل الإطارات: أسلاك الفولاذ التقليدية: وهي مكوّنة من سبائك الفولاذ الصلب، وتُستخدم في معظم الإطارات المخصصة للشاحنات والسيارات، وتمنح قوة عالية ومقاومة للتآكل. أسلاك الفولاذ المعالجة حرارياً: حيث تُسخَّن السبائك الفولاذية المعززة إلى درجات حرارة عالية بغرض زيادة مرونتها وقابليتها على التحمل، ويتركّز استخدام هذا النوع في الإطارات التي تتطلب أداءً عالياً في الظروف القاسية. الأسلاك المعدنية المغلّفة: وهي أسلاك فولاذية مُضاف إليها غلاف من مادة معدنية أخرى كالنحاس أو الزنك، وتمتلك قدرة أعلى على مقاومة التآكل والتلف، مما يوفر حمايةً كافيةً للأسلاك الفولاذية ويعطي الإطار عمراً أطول مقارنةً بغيره من الإطارات العادية. اختيار دربك للنوع المناسب من هذه الأسلاك وفق طبيعة كل منتج — شاحنة ثقيلة، أو معدات بناء، أو حافلات نقل عام — هو في حدّ ذاته قرار هندسي يستند إلى حسابات دقيقة في توزيع الأحمال والمقاومة الميكانيكية. "شركة دربك تختار الأفضل للطرقات السعودية" الألياف الصناعية في الإطارات:طبقات الدعم الخفية نسيج الإطار الداخلي الألياف الصناعية هي عنصر آخر لا يراه أحد لكنه يُحدد كثيراً مما يشعر به السائق، تُعرّف بأنها: ألياف مصنوعة من مواد معالجة كيميائياً مما يجعلها ذات خصائص فيزيائية وكيميائية مميزة، وتُضاف هذه الألياف إلى الإطارات كطبقات ساندة توفر دعماً جيداً للطبقات الداخلية من الإطار، والتي تُعرف باسم نسيج الإطار (Tire Cord Fabric)، مما يُعطي الإطار القدرة على الحفاظ على هيكله الداخلي وتحمل الصدمات بقوة بدون تفكك أو تلف. من النايلون إلى الكيفلار نتتبع تطور هذه الألياف عبر الزمن: ففي الخمسينيات أُدخل النايلون وأرسى الأسس الثورية في عالم صناعة الإطارات ثم في السبعينيات ظهرت ألياف الأراميد (Kevlar) بوصفها مزيجاً مثالياً بين المتانة والمرونة وخفة الوزن، فأصبحت الخيار الأكثر شيوعاً في صناعة إطارات الأداء العالي واليوم، تواكب شركة دربك التطورات الأحدث في هذا المجال، ومنها مركبات الألياف المستمرة التي وفّرت نسبة قوة إلى وزن استثنائية ومتانة معززة مقارنةً بالألياف المركبة التقليدية. المداس — حيث تلتقي الهندسة بالطريق الطبقة التي تتكلم مع الأرض المداس هو الجزء الوحيد من الإطار الذي يلمس الطريق فعلياً في كل لحظة من لحظات القيادة، ويعرف بأنه الطبقة الخارجية العلوية للإطار، وتُصنع عادةً من خليط مطاطي متراكب يوفر متانةً وصلابة، مع تعزيزه بمواد مضافة لتحسين مقاومته للتآكل والتشقق والتلف، أما الأخاديد والقنوات الموجودة في المداس فهي تصميم هندسي مدروس يُحدد طريقة تفاعل الإطار مع سطح الطريق. أربعة أدوار تؤديها نقشة دربك هناك أربعة أدوار محورية يؤديها المداس في كل إطار من إطارات دربك: التماسك على الطرقات: فالمداس هو: الوسيط الرئيسي بين الطريق والشاحنات، وبذلك يمكن اعتباره المسؤول عن ثبات الشاحنة على مسارها أثناء القيادة، وهذا الأمر يتطلب توافقاً بين بيئة الطريق وتصميم الأخاديد في سطح المداس. توزيع الضغط الكلي: إذ يساعد تصميم المداس على توزيع الضغط الناتج عن الحمولة الكلية للشاحنة، وتوزيعه على السطح المقابل للأرض، مما يعطي الإطارات أفضل وضعية تحت الضغط الكبير، من دون حصول انفجار مفاجئ وسط الرحلة على الطرقات السريعة. مقاومة التآكل: وهو الجزء الذي يتعرض لأكبر قدر من الاحتكاك مع الأرض، مما يعني أنه الجزء الذي يُحدد مدى سرعة استهلاك الإطار، لذلك تعمل دربك على تعزيز قوة ومتانة طبقة المداس حتى تكون أطول عمراً وأكثر كفاءة. تقليل مخاطر الانزلاق: فـ وجود الأخاديد في المداس يُعزز من قدرة المداس على تصريف المياه والوسائط الأخرى، مما يُجنّب الشاحنة الانزلاق بسبب قلة مساحة الاحتكاك بالأرض. تصميم النقشة وفق الطريق المداس لا ننظر إليه كعنصر واحد، بل كنظام قابل للتخصيص وفق طبيعة الاستخدام وكما يُوضّح تحليل دربك للفرق بين إطارات الطريق السريع وإطارات المناطق الوعرة في مقالات سابقة، فإن الاختلاف بين نوعي الإطارات يبدأ من تصميم النقشة ذاتها: في إطارات الطريق السريع، تتميّز النقشة بـ خطوط متوازية لتصريف المياه وتقليل الاحتكاك مع الأسفلت وتقليل الضوضاء والاهتزاز، وتُتيح هذه الهندسة الدقيقة للإطار أن يُحقق ثباتاً عالياً عند السرعات المرتفعة ومسافة فرملة أقصر على الأسفلت وتجربة قيادة أكثر سلاسةً وهدوءاً. أما في إطارات المناطق الوعرة، فتتحوّل النقشة إلى كتل مطاطية كبيرة ومتباعدة وفراغات واسعة لمنع تراكم الطين، مع جدران جانبية أكثر سماكةً تحمي الإطار من التمزق أو القطع عند الاحتكاك بالصخور أو الحواف الحادة وتُؤكد الشركة أن اختباراتها الداخلية أظهرت تحسّن الأداء والثبات بنسبة تصل إلى 15% عند اختيار الإطار المناسب لكل طريق. ثلاثة أعمدة لجودة الإطارات — الركائز التقنية في دربك لا نكتفي بالحديث عن المواد الخام، بل نحدد لك ثلاثة ركائز تقنية تُشكّل عمود الجودة في كل إطار يتم انتاجه: الركيزة الأولى: تقوية الإطارات وهي عملية هندسية هدفها:ضمان أداء أفضل وأمان أعلى، مع زيادة التحمل والثبات وتحسين عمر الإطار وكفاءته على الطرق، وتُحقق دربك هذه التقوية عبر ثلاثة مستويات: زيادة التحمل والمتانة لمواجهة الأحمال الثقيلة والطرق الوعرة، وتحسين الأداء والسلامة بتقليل مخاطر الانفجار أو التآكل السريع، وتوفير مواصفات مناسبة للظروف الصعبة كالشاحنات والحافلات والمركبات المستخدمة على الطرق الصحراوية والصعبة. الركيزة الثانية: التوازن المنتظم لا يكفي أن يكون الإطار متيناً، بل يجب أن يكون متوازناً، ويصف الموقع الرسمي لدربك هذه الركيزة بأنها تُحافظ على ثبات الإطارات وتُقلّل الاهتزازات، ما يجعل القيادة أكثر سلاسةً وأماناً، ويُحسّن أداء الإطار وطول عمره الافتراضي، ونتائجها ملموسة في ثلاثة اتجاهات: قيادة سلسة ومريحة تُقلّل الاهتزازات والارتجاج، واقتصادية وطويلة العمر تحتاج إلى استبدال أقل مما يُقلّل التكاليف على المدى الطويل، وكفاءة وقود مُحسَّنة تُقلّل مقاومة الإطارات وتزيد كفاءة استهلاك الوقود. الركيزة الثالثة: الخلط والمعالجة وهي المرحلة التي تُحدد جودة المطاط ذاته كمادة أولية قبل أن يُشكَّل إطاراً، تضمن هذه العملية إنتاج مطاط عالي الجودة، مع توزيع متساوٍ للمكونات لتعزيز قوة الإطار ومرونته، وتحسين أداء الإطار في جميع الظروف. ونتائجها الثلاث: جودة مطاط مُحسَّنة من توزيع مثالي للمكونات يُنتج مطاطاً أقوى وأكثر مرونة، ومتانة أطول يُقلّل من العيوب الداخلية ويُحافظ على بنية الإطار لفترة أطول، وأداء ثابت يُحافظ على خصائص الإطار في درجات الحرارة المختلفة والطرق الصعبة. منظومة الاختبار — خمسون معياراً لا يُساوم عليها نظام الاختبار قبل الإطلاق لا تُطلق دربك أي منتج للسوق قبل أن يجتاز ما لا يقل عن خمسين معياراً دولياً للجودة، هذا الرقم الذي يُعلنه الموقع الرسمي للشركة ليس مجرد تسويق، بل هو إعلان عن منهجية عمل، فاجتياز خمسين معياراً يعني أن كل إطار يمر بمنظومة اختبارات تُقيّم كل خاصية من خصائصه في ظروف محاكَاة لمختلف بيئات التشغيل. تشمل هذه الاختبارات مقاييس دقيقة للتحمل الحراري عند درجات حرارة قصوى، ومعايير مقاومة التآكل على مختلف أنواع الأسطح، واختبارات الفرملة والثبات عند سرعات مختلفة، وتقييمات لمقاومة الانفجار تحت الضغط القصوى. وقد كان اجتياز هذه المنظومة الكاملة هو ما مهّد الطريق أمام دربك للحصول على علامة الجودة السعودية من الهيئة السعودية للمواصفات والمقاييس. الذكاء الاصطناعي في الاختبار من أبرز التطورات التقنية الحديثة في الصناعة، استخدام تقنيات المحاكاة بالذكاء الاصطناعي، حيث تعمل الشركات المصنعة للإطارات على توفير تقنيات محاكاة بالذكاء الاصطناعي تُعزز من تجارب تصاميم الإطارات، مما يسمح بتوفير نماذج واختبارها افتراضياً قبل صناعتها على أرض الواقع هذا النهج يُساهم في تعزيز الاقتصاد في سوق صناعة الإطارات ويُقلّل من المطاط المهدور، وتقليل التكاليف العامة للاختبارات. واستخدام الذكاء الاصطناعي في اختبار الإطارات الافتراضي يمثّل تحولاً جوهرياً في منهجية التطوير: بدلاً من الاعتماد الكامل على النماذج الفيزيائية المكلفة والمستهلكة للوقت، يُمكن اليوم محاكاة مئات السيناريوهات افتراضياً واختيار أفضلها قبل الانتقال إلى النموذج الفيزيائي، مما يُسرّع دورة التطوير ويرفع دقة النتائج. الإطارات الذكية والمستشعرات تقنية Cyber Tire التي تتضمن تعزيز طبقة المداس بمستشعرات قادرة على التواصل مع أنظمة المركبات مثل ABS والتحكم بالثبات، مما يُساهم في معرفة الحالة العامة للإطار، ومتى يعتبر الإطار متآكلاً وغير قابل للاستعمال هذه التقنية ليست مجرد اختراع مستقبلي، بل هي توجه يرصده فريق دربك الهندسي كجزء من خارطة الطريق التقنية للصناعة. سلسلة التوريد العالمية — أكثر من خمس وعشرين شريكاً نموذج التكامل لا الانعزال أحد أبرز القرارات الاستراتيجية التي اتخذتها دربك في بناء نموذج عملها التقني هو أنها لم تسعَ إلى صنع كل شيء بنفسها، بل بَنتْ شراكات مع أكثر من خمس وعشرين جهة تصنيع ومزوّد معتمد حول العالم، وهذا النهج يعني أن دربك تُتقن دور المطوّر والمُصمّم والمحكّم، بينما تُسند عملية التصنيع المادي إلى شركاء يمتلكون خبرة عميقة وبنية تحتية متطورة. هذا النموذج ليس استسلاماً لغياب المصنع الخاص، بل هو في الواقع أحد أكثر الاستراتيجيات الهندسية نضجاً في الصناعات القائمة على المعرفة، فالقيمة الحقيقية لا تكمن دائماً في امتلاك الآلة، بل في امتلاك المعادلة: المواصفات الدقيقة، ومعايير الجودة الصارمة، وخبرة الاختبار والتحقق التي تضمن خروج المنتج بالمستوى المطلوب بصرف النظر عن مكان تصنيعه. فريق هندسي دولي يعمل في دربك فريق هندسي مكوّن من أكثر من سبعة خبراء دوليين في تطوير وتصميم أحدث تقنيات الإطارات، وهؤلاء الخبراء هم الجسر الذي يصل المعرفة التقنية العالمية بالمتطلبات المحلية الخاصة بالسوق السعودي، دورهم لا يقتصر على الإشراف على التصنيع، بل يمتد ليشمل تطوير المواصفات الهندسية لكل طراز، وتحليل نتائج الاختبارات الميدانية، وترجمة احتياجات العميل السعودي إلى معادلات فيزيائية وكيميائية قابلة للتطبيق. التكنولوجيا وفق الاستخدام — الإطار الصحيح للطريق الصحيح مبدأ التخصيص الدقيق ما يُميّز مقاربة دربك التقنية عن كثير من المنافسين هو أنها لا تُؤمن بـ"الإطار الشامل الذي يُناسب الجميع" بدلاً من ذلك، تُطبّق مبدأ التخصيص الدقيق: لكل بيئة تشغيلية إطارها الخاص بمواصفاته الخاصة. تُؤكّد دربك هذا التوجه بوضوح: المستقبل في عالم كفرات الشاحنات في المملكة يتجه نحو التخصص الدقيق؛ لن يكون هناك بعد اليوم مفهوم إطار واحد يناسب الجميع بشكل فعال، وهذا ما يُترجمه فريق الشركة إلى واقع عملي: إطارات مُصمَّمة لشاحنات النقل السريع على الطرق البرية الطويلة تختلف كيميائياً وهندسياً عن إطارات المحاجر والمناطق الوعرة، وكلاهما يختلفان عن إطارات العمل الحضري في المدن. تقنية توزيع الوزن الذكي من التقنيات التي تُبرزها دربك في وصف إطاراتها، تقنية توزيع الوزن الذكي في المداس، حيث يتم توزيع الضغط بما يُقلّل من التآكل غير المنتظم، ما يزيد من كفاءة الإطار ويُعزز استقراره عند التوقف والانطلاق المتكرر، وتُبرز الشركة هذه التقنية بشكل خاص في إطار "دعسة ثبات" المصمّم للرحلات الحضرية الطويلة. المصنع السعودي 2030 — رؤية تبحث عن أرض من الشراكة الدولية إلى التصنيع المحلي يمثّل مصنع دربك المخطط له بحلول عام 2030 التحوّل الأكبر في المسيرة التقنية للشركة: الانتقال من نموذج التطوير والتسويق إلى نموذج التصنيع الكامل على الأرض السعودية. حين يصبح لدربك مصنع على الأرض السعودية، ستتغير الكثير من المعادلات: ستُصبح دورة التطوير أسرع، إذ لن يكون هناك وسيط جغرافي بين اللحظة التي يُقرّر فيها الفريق الهندسي تعديل مواصفة ما واللحظة التي يُنتج فيها النموذج الجديد فعلياً،وستُصبح قدرة التخصيص أعمق، لأن المصنع المحلي يسمح بضبط العمليات الإنتاجية بدقة أكبر وفق متطلبات السوق المحلي، كذلك ستُصبح سلسلة التوريد أكثر استقراراً، إذ لن تتأثر الأسعار والتوافر بتقلبات الشحن الدولي وبؤر الضغط العالمية. خلق كفاءات وطنية الجانب الذي تُبرزه دربك بوضوح في خطة المصنع هو أنه ليس مجرد مشروع اقتصادي، بل هو مشروع بناء كفاءات وطنية، فالمصنع سيخلق فرص عمل جديدة للكفاءات الوطنية، وسيُشكّل بيئة تدريب عملية لمهندسين سعوديين على تقنيات صناعة الإطارات من داخل المصنع لا من خلف الشاشات. هذا البُعد في التوطين لا يُكمّل فقط رؤية المملكة 2030 في توطين الصناعات الاستراتيجية، بل يُرسّخ المعرفة التقنية داخل المجتمع السعودي، وهي خطوة أبعد مدىً وأعمق أثراً من مجرد خلق فرص عمل. خاتمة: التقنية ليست غاية بل وسيلة حين تجمع كل هذه العناصر معاً — خلط المطاط وفلكنته، والكربون الأسود بنوعيه التقليدي والمستعاد، والأسلاك المعدنية بأنواعها الثلاثة، والألياف الصناعية من النايلون إلى الكيفلار، وتصميم المداس وفق طبيعة الطريق، ومنظومة الاختبار بمعاييرها الخمسين، وفريق الخبراء الدوليين والشراكات العالمية — تتضح الصورة: دربك ليست شركة تبيع إطارات، بل شركة تُنتج حلولاً هندسية مُخصَّصة لطرق بعينها وبيئات بعينها. التقنية في دربك لا تُوجد لذاتها، بل توجد لخدمة غاية محددة: أن يصل السائق السعودي إلى وجهته بأمان، وأن يجد مدير الأسطول اللوجستي في إطار دربك شريكاً لا يخذله وسط الصحراء أو في قلب منحنيات الجنوب. والأهم من كل ما سبق أن هذه التقنية لا تزال في مرحلة البناء، لا في مرحلة الاكتمال. فمع المصنع القادم بحلول 2030، ومع متابعة الشركة لكل تطور في علوم المطاط والكربون والألياف والذكاء الاصطناعي، فإن قصة دربك التقنية لم تُكتب فصولها الأكثر إثارةً بعد....

Ahmed Nazem

May 10, 2026